Freon MO79 (R422a)

Used for applications:

• Direct expansion of low and medium temperature commercial and industrial refrigeration equipment
• Food Service
• Cooling screen in supermarket
• Food storage and processing
• Ice machine

Benefit:

1. Easy-to-use, fast, and cost-effective retrofit process:
   Replacing R22, R502, and HCFC blends (e.g., HP80, HP81, R408A)
2. Retrofit is easier than R404A and R507
3. Does not damage the ozone layer
4. Not included in the Montreal Protocol termination list
5. Compatible with AB, MO and POE lubricants
6. In most cases, there is no need to change the type of lubricant.
7. No need to replace existing equipment
8. Non-flammable
9. Lower discharge temperature than R22, thus tending to extend compressor life
   increased cooling capacity compared to R22 in many operating conditions, up to + 30% in low temperature conditions
10. Low toxicity (similar to R22, R502 and R404A)
11. Global Warming Potential (GWP) is 20% lower than R404A and R507
12. After reinforcement, Freon MO79 can be added without having to drain the entire coolant content.

It is recommended to use lubricants, mineral oil, alkylbenzene and polyol esters, in most cases it is not necessary to change the type of lubricant during the retrofit process.

Lubricants are determined by a number of operating and design conditions, in some complex systems. Piping configurations, POE may need to be added. Minor equipment modifications (e.g., replacement seals) or extensive adjustment or replacement of devices may be required in some applications.

Product composition (Component Weight%):

• Freon 134a (11.5%)
• Freon 125 (85.1%)
• Isobutane R600a (3.4%)